With the Screwdriver or Electric Screwdriver the orientation of the machine can be change freely to all directions, and with additional holding the crouch-key the orientation along the y-axis can be changed easier.
For operation the Frame Linear Actuator requires Electrotine Power, which can be supplied by Low Load Power Line and Framed Low Load Power Line. If the machine has enough power, one the lower half of the machine lights up some blue lights.
To move a block on the top of the machine (only the block direct on the top), the machine needs a redstone signal. This can receive via Redstone or the Red Alloy Wire and Insulated Wire from Project Red.
If the machine is loaded with energy, no other block is blocking the movement direction and a redstone signal receives the machine, the block on the top moves one block upward.
To moves a second block (which eg. was moved by an Frame Motor on the Frame Linear Actuator) the first redstone signal must be terminated and an new signal must receive the Frame Linear Actuator.
This page was last edited on 30 August 2019, at 22:35.
Content is available under CC BY-NC-SA 3.0 unless otherwise noted. Game content and materials are trademarks and copyrights of their respective publisher and its licensors. All rights reserved.
This site is a part of Fandom, Inc. and is not affiliated with the game publisher.