- This page is about the Electric Pump added by GregTech 5. For other uses, see Electric Pump.
| Electric Pump | |
|---|---|
| Mod | GregTech 5 |
| Type | Component |
The Electric Pump is a component used in the crafting of several GregTech 5 electric machines, and also functions as a cover that can be used to automate fluid extraction and insertion. A Crowbar can be used to remove the Electric Pump from the machine it is attached to.
Recipe[]
The Electric Pump has several different operating modes. The active mode can be switched using a Screwdriver.
| Mode | Description |
|---|---|
| Export | Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. |
| Import | Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. |
| Export (conditional) | If allowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. |
| Import (conditional) | If allowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. |
| Export (invert cond) | If disallowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. |
| Import (invert cond) | If disallowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. |
| Export allow Input | Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor. |
| Import allow Output | Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor. |
| Export allow Input (conditional) | If allowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor. |
| Import allow Output (conditional) | If allowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor. |
| Export allow Input (invert cond) | If disallowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor. |
| Import allow Output (invert cond) | If disallowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor. |
Each tier of Electric Pump has a different speed at which it moves fluids. Every tick, it attempts to move fluid equal to 1/20th its listed transfer rate, and if it succeeds and is capable of consuming energy it will consume 1 EU per 10L fluid.
| Name | Fluid per second (L) | Fluid per tick (L) |
|---|---|---|
| Electric Pump (LV) | 640 | 32 |
| Electric Pump (MV) | 2560 | 128 |
| Electric Pump (HV) | 10240 | 512 |
| Electric Pump (EV) | 40960 | 2048 |
| Electric Pump (IV) | 163840 | 8192 |