- This page is about the Charging Bench from Project Red. For other uses, see Charging Bench.
Charging Bench | |
---|---|
Mod | Project Red |
Type | Machine |
Required modules | Expansion |
The Charging Bench is a machine added by Project Red. On this bench the batteries of Project Red can be loaded with energy from a Electrotine Power network (see Usage).
If the mod MineChem is installed, then you can decompose the Charging Bench with the Chemical Decomposer into 48 Iron (Fe), 32 Tin (Sn), 32 Copper (Cu) and possibily some other elements and compounds of MineChem.
Recipe[]
Usage[]
With the Screwdriver or Electric Screwdriver the orientation of the Charging Bench can be change freely around the y-axis.
For operation, the machine requires Electrotine Power, which can be supplied by Low Load Power Line and Framed Low Load Power Line. If the machine has enough power, one the sides of the machine lights up some blue lights.
The left gauge in the the GUI indicates the voltage of connected energy network. For operation the machine needs min. 50V (the half of the gauge). The right gauge indicates the internal energy storage of the furnace. This storage is filled up, if the voltage of the connected power network is stable and more energy is filled in the power network. The stored energy will be consumed if the voltage of the connected power network falls under 50V.
In the upper slots, the batteries are placed, which should be loaded. If multiple batteries are placed, the loading process evenly distributed on all batteries, thereby placing them but charged more slowly. In the lower slots fully charged batteries are placed automatically.
|