| Bottling Machine | |
|---|---|
| Mod | Immersive Engineering |
| Type | Multiblock structure |
| Energy | |
| Max RF input | 256 RF/t |
| RF use | 8 RF/t |
| RF storage | 16,000 RF |
The Bottling Machine is a 3x2x3 multi-block added by Immersive Engineering. It is used to fill liquid containers.
Construction[]
Version 1.12.2[]
The Bottling Machine requires:
- 3
Steel Scaffolding - 2
Iron Sheetmetal - 1
Redstone Engineering Block - 2
Light Engineering Blocks - 3
Conveyor Belts - 1
Fluid Pump
Conveyor belts must point from left to right. Right-click with an Engineer's Hammer on the middle conveyor to form the multiblock.
Older versions[]
The Bottling Machine requires:
The orientation of the Conveyor Belts is important, though it can be reversed.
After it is fully arranged, right-clicking the middle Conveyor Belt with an Engineer's Hammer will complete the multi-block structure.
Usage[]
A Bottling Machine filling Glass Bottles with Water
The Bottling Machine has no GUI. Redstone Flux (RF) is supplied through the top-back-central block of the multi-block (where the Light Engineering Block was).
Fluids are added through the bottom-middle block of the backside. Items are added by dropping them on the Bottling Machine's Conveyor Belts. When a liquid storing item (such as a Bucket or Jerrycan) is introduced to the Bottling Machine, the Bottling Machine will fill and output it, consuming some RF.
The Bottling Machine with fill each container with up to 32 buckets (32,000 mB) of fluid with each pass. If the container can hold more then 32,000 mB, or if the machine runs out of the liquid, it will be sent down partially full and may need to be sent back around by conveyor belts to be filled more.