Autarchic Diamond Gate

Autarchic Diamond Gate
Mod	BuildCraft
Type	Item

The Autarchic Diamond Gates are items added by BuildCraft and a specific design of the Basic Gate to control and/or interact with all pipes of BuildCraft via eight configurable functions. The autarchic design has two additional options available to operate pipes autonomously (without engine) (see Usage). The gate has also an AND and OR version.

Recipe

25,000 RF

Integration Table

Usage

A Diamond AND Gate interacts with all four types of Pipe Wire to transmit redstone signals. Pipe Wires on different pipe types can be connected via Cobblestone Structure Pipe.

The Autarchic Diamond Gate can be placed on all types and sides of the BuildCraft pipes with a right-click. By holding the crouch-key and right-clicking the gate can be removed without to destroy the pipe.

Note: The basic function is that the gate checks the precondition in the right slot, and, if this precondition is true, executes the option in the left slot. The bar between the left and right slot light up red when the precondition is currently True. The difference between the AND and the OR version is when it will trigger an action. Both will trigger if one precondition is true, but if the AND version is used, and two or more conditions are set to trigger the same action, the action will only trigger when both preconditions are True. If the OR version is used and two or more preconditions are set to the same action, the action will trigger when either of the preconditions is True. The different to the Standard design is, that the autarchic design has two additional options (yellow marked in the table below), which are available for all pipes, but are only usefull to operate pipes they need RF for example the extraction pipes.

With a right-click the player can open the GUI, which has eight rows, each having three slots, to configure functions. All slots can be configurated by clicking in the slot. The possible options depends on the pipe where the gate was mounted:

• All options like the standard Gate (goto)
• Additional options of the Autarchic Gates (goto)
• Additional options of the Diamond Gates to interact with pipes and storage (see below)
• Furthermore the Autarchic Diamond Gate has the ability to interact with all types Pipe Wires to transmit and/or receive redstone signals over the BuildCraft own wire system. An example with a Diamond AND Gate is shown in the picture. In the GUI the corresponding option is selectable if a pipe wire is connected to the gate (see section Additional options for pipe wire interaction)

Additional options for all pipe types

Following options are additional available for pipes (kinesis, fluid, transport):

	Left slot (1. precondition; 2. special option)					Right slot
	Icon	Text	Icon	Text	Explanation	Icon	Text	Explanation
Kinesis, Fluid, Transport Pipes		Redstone Signal On			Set True if a redstone signal receives the gate
				Gate Side Only	Set True if a redstone signal receives directly the side with the gate
		Redstone Signal Off			Set True if no redstone signal receives the gate
				Gate Side Only	Set True if no redstone signal receives directly the side with the gate
Transport Pipe		Items Traversing		empty	Set True if the transport pipe transmits any item
				for example Stone	Set True if the transport pipe transmits Stone (item can be placed by drag and drop)

Additional options for extraction pipes and connected storage

Following options are additional available for all extraction pipes and pipe they are connected to a storage. Note: In the second slot can be placed an item to specify the function.

	Left slot					Right slot
	Icon	Text	Icon	Text	Explanation
Transport Pipe		Inventory Has Space			Set True if the inventory is full (independet of the item)
				for example Stone	Set True if the connected inventory is full with Stone
		Inventory Has Space			Set True if a redstone signal receives the gate about a red pipe wire
				for example Stone	Set True if a redstone signal receives the gate about a red pipe wire and the second option is True
		Inventory Contains <25%			Set True if the connected inventory has lesser than 25% of the item in the second slot
		Inventory Contains <50%			Set True if the connected inventory has lesser than 50% of the item in the second slot
		Inventory Contains <75%			Set True if the connected inventory has lesser than 75% of the item in the second slot
Wooden Fluid Pipe and pipes connected to tanks		Contains < 25%			Set True if the connected tank contains lesser than 25% of any fluid
				for example Water Bucket	Set True if the connected tank contains lesser than 25% Water
		Contains < 50%			Set True if the connected tank contains lesser than 50% of any fluid
				for example Water Bucket	Set True if the connected tank contains lesser than 50% Water
		Contains < 75%			Set True if the connected tank contains lesser than 75% of any fluid
				for example Water Bucket	Set True if the connected tank contains lesser than 75% Water
		Fluid in Tank			Set True if the connected tanks contains any fluid
				for example Water Bucket	Set True if the connected tank contains Water
		Space for Fluid			Set True if the connected tanks has space for any other fluid
				for example Water Bucket	Set True if the connected tank has space to gather Water
		Fluid Traversing			Set True if the pipe transmits any fluid
				for example Water Bucket	Set True if the pipe transmits Water

Additional options for pipe wire interaction

Following options are additional available for all types (kinesis, fluid, transport) if Pipe Wire is connected to the gate:

	Left slot					Right slot
	Icon	Text	Icon	Text	Explanation
Kinesis, Fluid, Transport Pipes		Red Pipe Signal On			Set True if a redstone signal receives the gate about a red pipe wire		Red Pipe Signal	Activates a red pipe wire signal
					Set True if a redstone signal receives the gate about a red pipe wire and the second option is True		Blue Pipe Signal	Activates a blue pipe wire signal
		Red Pipe Signal Off			Set True if no redstone signal receives the gate about a red pipe wire		Green Pipe Signal	Activates a green pipe wire signal
					Set True if no redstone signal receives the gate about a red pipe wire and the second option is True		Yellow Pipe Signal	Activates a yellow pipe wire signal
		Blue Pipe Signal On			Set True if a redstone signal receives the gate about a blue pipe wire
					Set True if a redstone signal receives the gate about a blue pipe wire and the second option is True
		Blue Pipe Signal Off			Set True if no redstone signal receives the gate about a blue pipe wire
					Set True if no redstone signal receives the gate about a blue pipe wire and the second option is True
		Green Pipe Signal On			Set True if a redstone signal receives the gate about a green pipe wire
					Set True if a redstone signal receives the gate about a green pipe wire and the second option is True
		Green Pipe Signal Off			Set True if no redstone signal receives the gate about a green pipe wire
					Set True if no redstone signal receives the gate about a red pipe wire and the second option is True
		Yellow Pipe Signal On			Set True if a redstone signal receives the gate about a yellow pipe wire
					Set True if a redstone signal receives the gate about a yellow pipe wire and the second option is True
		Yellow Pipe Signal Off			Set True if no redstone signal receives the gate about a yellow pipe wire
					Set True if no redstone signal receives the gate about a yellow pipe wire and the second option is True